  ****************************************************************************
  *              IBM Personal Communications AS/400 Version 4.1              *
  *                                for Windows                               *
  *                                                                          *
  *                             Read Me - Please!                            *
  *                                (README.TXT)                              *
  ****************************************************************************

  First Edition
  -------------
  This document contains information supplementary to the online Help and the
  Publications; it includes such things as newly-added function, hints, tips,
  restrictions and corrections.

  For information on installing Personal Communications, please refer to
  the online Help for the INSTALL program.

  Thank you very much for choosing Personal Communications v4.1 !

  ========
  Contents
  ========

  * Support for the Greek language
  * Language-oriented Customize Keyboard layout
  * File-transfer setting (PC Code-Page)
  * ODBC Drivers
  * Configure IBM Personal Communications for Thai (Thai only)
  * Thai Display Mode selection (Thai only)
  * To switch Thai/Latin KEYBOARD (Thai only)
  * Language shift status (Thai only)
  * Thai Display Composed mode (Thai only)
  * Print Space Adjustment (Thai only)

  ==============================
  Support for the Greek language
  ==============================

  The Greek character set is now supported.

  However, if you are using Windows for Greek, you need PCS1253.FON
  file.
  If you use Greek Windows, you must confirm that 'Show Only True Type
  Fonts in Applications' is set to OFF in the 'True Type' window. You
  can open this window by selecting 'Fonts' from the Control Panel, and
  then selecting the 'True Type' push button.


  ===========================================
  Language-oriented Customize Keyboard layout
  ===========================================

  The keyboard layout that is displayed when you open the Customize Keyboard
  dialog will now be correct for the language that Windows is configured for.
  Previously, the layout was always US 101-key.


  ====================================
  File-transfer setting (PC Code-Page)
  ====================================

  The PC-code-page values that are valid for the current session are displayed
  in numeric order in the Miscellaneous Settings windows of the File-Transfer
  dialog.  If a character is wrongly translated when it is transferred, please
  check whether the window shows the code-pages that you expect.  You can open
  the window with Transfer - Setup - Miscellaneous Settings.

  ============================================
  Telnet5250 session file transfer restriction
  ============================================

  When you transfer a file on Telnet5250 session, you can not transfer a binary
  file which includes 'FFEF'.
  The current version of AS/400 Telnet program misinteprets 'FFEF' in
  the data as an end of record.

  ============
  ODBC Drivers
  ============

  To guarantee the data integrity, you should avoid closing MS-Windows from
  System Menu during the data transfer.


  ==========================================================
  Configure IBM Personal Communications for Thai (Thai only)
  ==========================================================

  1) select Communication menu, then
  2) select Configure...
  3) for each configuration, select Host Code-Page to be  
     either one of the following:
      (1) 838 Thai
      (2) 037 Thai/US

  To enable Thai keyboard input:
  1) select Assist menu, then
  2) select Keyboard Setup...
  3) select Keyboard Layout: Thai

  Note: Thai features are enabled when runs on Windows 3.1,3.11 Thai only and
	these Thai settings are defaults.

  =======================================
  Thai Display Mode selection (Thai only)
  =======================================
  Select menu 'Appearance' on emulator session,
  Then select 'Thai Compose Mode...'
 
  =========================================
  To switch Thai/Latin KEYBOARD (Thai only)
  =========================================
  Alt+left shift  = activate Latin shift
  Alt+right shift = activate Thai shift

  =================================
  Language shift status (Thai only)
  =================================

  The language shift indicator is shown in the status line of
  each emulator session.
  If keyboard is in Thai language shift, indicator 'TH' will
  be shown in status line.

  ======================================
  Thai Display Composed mode (Thai only)
  ======================================

  Mode 1 - Non-compose mode
           There is no character composing in this mode.

  Mode 2 - Composed mode
           Thai character is auto composed in this mode.
           No column realignment is performed.

  Mode 3 - Composed with space alignment
           During this mode of composing, column realignment is
           also performed by three consecutive spaces.
           When composing routine finds three consecutive spaces,
           column realignment occurs. So, if all fields have at least
           three trailing spaces, then all fields of all records will
           be properly aligned.

  Mode 4 - Composed with EOF alignment
           During this mode of composing, column realignment is also
           performed by EOF character (Hexadecimal 'EA').
           When composing routine finds single EOF, it will delete
           this character and perform column realignment. If two
           consecutives EOF are found, no realignment occurs,
           one EOF is deleted, and one EOF is treated as a data.

  Mode 5 - Composed with space and EOF alignment
           This mode of composing perform column realignment function
           of both mode 3 and mode 4.

  ==================================
  Print Space Adjustment (Thai only)
  ==================================

  In case of any printer that need space adjustment for Thai printing.
  Please add the following statement to PCSWIN.INI residing in 
  PCOMWIN\PRIVATE directory.

     [Thai]
     PrintAdjust=x

     The value of x can be:
       0 = no adjustment (same as no PrintAdjust statement)
       1 = Perform adjustment when found three consecutive spaces
       2 = Perform adjustment when found EOF character
       3 = Perform adjustment when found three consecutive spaces
           or EOF character (combine 1 and 2)


